3-IN-1 Multi-Function Hatchet

 

3-IN-1 Multi-Function Hatchet Video


Availability & Pricing


Member Rating: 3-IN-1 Multi-Function Hatchet

Do you own or have you used the 3-IN-1 Multi-Function Hatchet? If so, rate it!

You must be registered and logged in to rate!

TomahawkDB Member Rating
Not yet rated!

Blade Type Information: Steel

When you are looking for information on steel blades on tomahawks, axes or knives then you need to check out the selection at Tomahawk Database. They have almost every type imaginable listed there with information such as who manufactured it, what type of tool it is, the type of edge it has, blade type, the length of the entire tool as well as the edge and how much it weighs. They also give brief descriptions of each item.

Knives

Are you aware that there are myriad types of "steel" blades that are actually made from a steel alloy? If the main material in the alloy is steel then it can be legally marketed as a "steel" blade. This is important because different steel alloys have different strengths and therefore are available for use in different applications. For example, Spring steel is popularly used in knife blades because of it having the properties of good resistance to wear and its toughness. For good stability in the edge and resistance to wear some knife manufacturers use O1 steel alloy. These manufacturers include Mad Dog Knives as well as Randall Knives.

Axes

Axe blades have evolved through the millennia. When axes were first invented they did not even have handles. The blade was held in the hand and made of stone. As time passed and technology advanced they began being made by things such as copper, iron, bronze and yes, steel.

Tomahawks

Tomahawks and axes are basically the same tool with subtle differences. First, there is a popular belief that tomahawks are better for throwing than axes. The most noticeable difference though is the fashion in which the handle has been attached to the blade. That being said, most tomahawks now have steel blades just like axes.

No matter what type of knife, axe or tomahawk you are looking for, you can find out exactly which ones have steel blades at Tomahawk Database.

Handle Material Information: Sure Grip Rubberized Handle

You might actually be surprised to know what tools come with this type of handle. First though before we get into that letís talk a bit about what this is for those who may not know.

What it is

Basically a tool that has a sure grip rubberized handle more than likely has a handle with only the top layer being covered in sure grip rubber. This type of rubber not only gives you a firm grip (think rubber tires on wet roads sort of grip) but it also reduces the amount of shock that you receive when using the tool in question.

Tool Types

From what was just described as well as your familiarity with tools, what sort of tools do you think would have this sort of handle? Hammers are what might first come to mind. There are other tools with this sort of handle too and one that might even surprise you, but we will save that one for now.

Axes are a type of tool that is available with a sure grip rubberized handle. It is important that there is some type of handle that you can get a good grip on with this tool in particular because of the danger involved if it flies out of your sweaty hands. That is also absorbs some of the shock from impact is just a plus.

Now, surprisingly there are tomahawks with this type of handle. Tomahawks are more associated with wooden handles but it is possible to find some like this. While they are typically used for throwing a good grip means that you will not lose your grip on it in the process and scalp yourself!

For more information on this and other bladed items check out what is going on at Tomahawk Database.

Rockwell Hardness: n/a

The 3-IN-1 Multi-Function Hatchet has a Rockwell Hardness of n/a

Stanley P. Rockwell inevnted the Rockwell Hardness Test in 1919 while working as a metallurgist in ball bearing plant. Rockwell wanted to measure the uniformity and hardness of inner and outer rings on which the ball bearings rolled. He designed a device that could measure hardness accurately and quickly.

The American Society for Testing and Materials (ASTM) standardized a set of scales for testing Rockwell hardness values. Each scale has been designated a letter and corresponds to a different group of materials. Scale C is used for steel, titanium, deep case hardened steel, hard cast irons and other materials harder than scale B 100.

Knife blades and other steel hardened tools are made from metals that match to the Rockwell C scale. Most blade makers display the hardness number as "HRC xx" or "HRC xx - xx" providing a range, where "xx" indicates a Rockwell hardness number. Not many blades measure over HRC 70. Most functional blades rate somewhere between HRC 56 and HRC 63.

Generally, blades with a lower HRC number don't hold and edge for long under demanding use, but they are easier to sharpen. Blades with a higher HRC value stay sharp for longer, but are more difficult to sharpen. As an example, stainless steel has a HRC higher than carbon steel, but it is also more difficult to sharpen than carbon steel.

Company Information: United Cutlery

United Cutlery is one of the oldest continually operating knife and sword companies in the world. Founded in the 1990s, its founders opened the company in the hopes of giving everyday people the chance to own the same exciting weapons seen on film and television. The company now makes hundreds of different products, including functional swords and fantasy knives. Customers can find hunting knives, throwing knives, movie replicas, military knives, utility knives and dozens of other products.

United Cutlery has several partnerships established that let it create authentic replicas from hit films. It has the rights to "The Lord of the Rings" trilogy, "The Hobbit: An Unexpected Journey," "The Expendables" and "The Expendables 2."

United Cutlery also makes a number of fantasy pieces that look great on display. The company has four designs on staff, and these designers work closely with the men and women responsible for making the pieces seen on screen.

Many people know United Cutlery for its film replicas, but the company also makes knives and other weapons used by the military, fishermen and outdoors-men every day. Its product line includes tools designed for hunting and fishing.

United Cutlery's wide range of products appeal to those who love fantasy novels, action films and the great outdoors. Each piece uses strong and durable metal that ensures United Cutlery pieces will last for years, making many customers buy products again and again for display and personal use.

Unlike other companies that offer products for sale directly to consumers, United Cutlery wholesales its products to dealers. Shopping through authorized dealers lets customers know that their purchases come directly from the company.

Comments on the 3-IN-1 Multi-Function Hatchet

Have you or someone you know purchased or used the 3-IN-1 Multi-Function Hatchet? How did it work? Share with the community!

Your Name:
Comment:
Type (case sensitive) here:
No comments have been entered!