Armory Replicas WG1023

 

Armory Replicas WG1023 Video


Availability & Pricing


Member Rating: Armory Replicas WG1023

Do you own or have you used the Armory Replicas WG1023? If so, rate it!

You must be registered and logged in to rate!

TomahawkDB Member Rating
Not yet rated!

Blade Type Information: Stainless Steel

Stainless steel was first introduced to the general population in the early part of the 20th century. Sold under various names until well into the 20s, stainless steel became a big seller in the US. The steel itself is made so that it does not corrode easily and it will not rust nor stain when immersed in water. There are a multitude of grades and finishes in stainless steel, each a direct answer to varying applications and environmental needs. The biggest difference between stainless steel and carbon steel is the presence of chromium. This one agent is the difference between a metal that easily rusts when exposed to the elements and the stainless steel finish we have come to expect from the products.

With over 150 grades of stainless steel to choose from, the metal is used in a variety of everyday products. Modern day cookware, cutlery and utility blades, household items such as mixing bowls, precise surgical instruments, household appliances in every size, in automobiles, and even architecture are some of the things you will find that use the metal.

Stainless steel is popular for a very good reason. Apart from the fact that it does not stain nor rust, the metal is durable and easy to apply to any project. The consumer is also able to recycle 100% of the metal. When using stainless steel, one needs to pay close attention at the grade of the product and keep in mind the usage. Not all stainless steel metals are made alike. In the 200 series, the manufacturers decrease the nickel content while increasing the manganese content, making the metal a bit more corrosive. The 300 series, which happens to be the most widely used by consumers, is manufactured in such a way as to increase the level of corrosion resistance.

Handle Material Information: Wood Handle

There are many different types of wood handles that are available for many different things. That being said, today we are going to concentrate only on three.

Tomahawks

Surely everyone is aware that not only were tomahawks used by Native Americans but they also had handles made from wood. Back then wood was just about the only material to make them with. Over time and with many experiments they finally decided which types of wood worked well and which didn’t. Popular theory is that hard woods work best although some did prefer the softer woods because they tended to be lighter and easier to throw.

Axes

Anyone today can go to a hardware store and find many tools with wooden handles. This includes axes. Why do you think that is? Does it make sense to use a wooden handled tool to chop down the very material that it was made from? Some might say no but the fact remains that many axe handles are made from some sort of hard wood…the actual wood may vary from manufacturer to manufacturer.

Knives

Knives look really good when they have a well-polished wooden handle. While they are not resistant to scratches and nicks, they are very strong and a good fit for a knife. You can find them with designs etched or burned into them and sometimes you can even find then with the wood unpolished and raw looking. There are many styles of wood handles for knives as well as many types of knives that they go on.

If this information helped you at all and even if it didn’t you can always find more information about this at Tomahawk Database. Regardless of the name of the site you can find all kinds of useful information not only about tomahawks but also about axes and knives.

Rockwell Hardness: N/A

The Armory Replicas WG1023 has a Rockwell Hardness of N/A

Stanley P. Rockwell inevnted the Rockwell Hardness Test in 1919 while working as a metallurgist in ball bearing plant. Rockwell wanted to measure the uniformity and hardness of inner and outer rings on which the ball bearings rolled. He designed a device that could measure hardness accurately and quickly.

The American Society for Testing and Materials (ASTM) standardized a set of scales for testing Rockwell hardness values. Each scale has been designated a letter and corresponds to a different group of materials. Scale C is used for steel, titanium, deep case hardened steel, hard cast irons and other materials harder than scale B 100.

Knife blades and other steel hardened tools are made from metals that match to the Rockwell C scale. Most blade makers display the hardness number as "HRC xx" or "HRC xx - xx" providing a range, where "xx" indicates a Rockwell hardness number. Not many blades measure over HRC 70. Most functional blades rate somewhere between HRC 56 and HRC 63.

Generally, blades with a lower HRC number don't hold and edge for long under demanding use, but they are easier to sharpen. Blades with a higher HRC value stay sharp for longer, but are more difficult to sharpen. As an example, stainless steel has a HRC higher than carbon steel, but it is also more difficult to sharpen than carbon steel.

Company Information: Armory Replicas

Armory Replicas is a small, niche company that was founded in October of 2005 in Georgia. They offer replicas of a variety of weapons from various cultures across numerous historical periods. Although they create daggers, rapiers, and other products related with weaponry, their specialty is in creating realistic medieval armory, swords, and their related products and accessories. Collectors from around the world visit their site daily due to their innate accuracy at duplicating some of histories finest weapons. Avid consumers of these types of specialty items will appreciate the craftsmanship and attention to historical detail each of their pieces possesses.

Armory Replicas also has an extensive collection of fantasy themed blades for niche collectors. Dragons, skulls, zombie apocalypse gear, and other fantasy themes are interwoven into beautifully artistic designs. These knives, axes, and daggers are fully functional pieces, capable of doing what they were originally crafted to do. Yet their beauty lends more to them being displayed on your wall or mantle as opposed to using them to hack anything to pieces.

The company has a lot more to offer than mere historical replicas and fantasy pieces for collectors. For the average consumer who is seeking a well-crafted blade or a piece of survival equipment, they manufacture and sell modern day self defense products. Pepper spray and specialized key chains, suitable for both men and women, from novice to expert, are but a few of the offerings. They also have a large selection of camping and hunting equipment for individuals to utilize. Knives with fire starter kits so that you need never worry about being in the dark, hiking canes for treacherous trails, paracord bracelets, key chains, and belts, and small axes that are deemed essential when in the outdoors are but a few of the items they have available.

Comments on the Armory Replicas WG1023

Have you or someone you know purchased or used the Armory Replicas WG1023? How did it work? Share with the community!

Your Name:
Comment:
Type (case sensitive) here:
No comments have been entered!