Econo Steel Grip Tomahawk - Atlas Chipping Hammers Come and Cross Chisel


Econo Steel Grip Tomahawk - Atlas Chipping Hammers Come and Cross Chisel Video

Availability & Pricing

No Ebay search results found for Econo Steel Grip Tomahawk - Atlas Chipping Hammers Come and Cross Chisel, sorry!

Member Rating: Econo Steel Grip Tomahawk - Atlas Chipping Hammers Come and Cross Chisel

Do you own or have you used the Econo Steel Grip Tomahawk - Atlas Chipping Hammers Come and Cross Chisel? If so, rate it!

You must be registered and logged in to rate!

TomahawkDB Member Rating
Not yet rated!

Blade Type Information: Steel

When you are looking for information on steel blades on tomahawks, axes or knives then you need to check out the selection at Tomahawk Database. They have almost every type imaginable listed there with information such as who manufactured it, what type of tool it is, the type of edge it has, blade type, the length of the entire tool as well as the edge and how much it weighs. They also give brief descriptions of each item.


Are you aware that there are myriad types of "steel" blades that are actually made from a steel alloy? If the main material in the alloy is steel then it can be legally marketed as a "steel" blade. This is important because different steel alloys have different strengths and therefore are available for use in different applications. For example, Spring steel is popularly used in knife blades because of it having the properties of good resistance to wear and its toughness. For good stability in the edge and resistance to wear some knife manufacturers use O1 steel alloy. These manufacturers include Mad Dog Knives as well as Randall Knives.


Axe blades have evolved through the millennia. When axes were first invented they did not even have handles. The blade was held in the hand and made of stone. As time passed and technology advanced they began being made by things such as copper, iron, bronze and yes, steel.


Tomahawks and axes are basically the same tool with subtle differences. First, there is a popular belief that tomahawks are better for throwing than axes. The most noticeable difference though is the fashion in which the handle has been attached to the blade. That being said, most tomahawks now have steel blades just like axes.

No matter what type of knife, axe or tomahawk you are looking for, you can find out exactly which ones have steel blades at Tomahawk Database.

Handle Material Information: Flex-O Steel Coil Grip

The Flex-O Steel Coil Grip is featured on many of the tomahawk products available. It is a desirable grip, needless to say, as it offers tremendous benefits to the products that has the ability to use it. Why are so many people head over heels for the steel coil grip?

The Flex-O Steel Coil grip makes it easy to hold your tomahawk. The grips are welded and pinned to keep them safe. With reinforced grips you can be certain that you are never losing hold of your tomahawk, which could prove to be a dangerous situation. Although the grips are in place, the handle is still comfortable to the touch and will not cause any pain in your hand.

Made of steel, the handles are strong and durable not to mention comfortable. They last for many years so replacing is a thing of the past. The steel material is so strong and durable it is also resistant to weather damage and corrosion.

Using the Flex-O means you are afforded shock resistance so there is no pain when you make impact with an object. This is a must in any tomahawk that you purchase.

If you think this handle is expensive, think again! The cost of the steel coil grip is just as affordable as any other handle, but certainly packed with more benefits.

As you can see there are quite a number of benefits of using the steel coil grip when you are in need of a good handle. These are just some of the many benefits that you can expect to find with the use of the steel grip.

This remarkable handle is appealing to men and women of all ages. It is the latest in technology that keeps you using the products that you need to use with ease. When in need of a tomahawk, do look for the Flex-O steel coil grip and get a product that outshines your expectations.

Rockwell Hardness: N/A

The Econo Steel Grip Tomahawk - Atlas Chipping Hammers Come and Cross Chisel has a Rockwell Hardness of N/A

Stanley P. Rockwell inevnted the Rockwell Hardness Test in 1919 while working as a metallurgist in ball bearing plant. Rockwell wanted to measure the uniformity and hardness of inner and outer rings on which the ball bearings rolled. He designed a device that could measure hardness accurately and quickly.

The American Society for Testing and Materials (ASTM) standardized a set of scales for testing Rockwell hardness values. Each scale has been designated a letter and corresponds to a different group of materials. Scale C is used for steel, titanium, deep case hardened steel, hard cast irons and other materials harder than scale B 100.

Knife blades and other steel hardened tools are made from metals that match to the Rockwell C scale. Most blade makers display the hardness number as "HRC xx" or "HRC xx - xx" providing a range, where "xx" indicates a Rockwell hardness number. Not many blades measure over HRC 70. Most functional blades rate somewhere between HRC 56 and HRC 63.

Generally, blades with a lower HRC number don't hold and edge for long under demanding use, but they are easier to sharpen. Blades with a higher HRC value stay sharp for longer, but are more difficult to sharpen. As an example, stainless steel has a HRC higher than carbon steel, but it is also more difficult to sharpen than carbon steel.

Company Information: Atlas

Atlas Knife Company is small business dedicated to making quality blades by hand. Over the years, the company has improved their forging techniques and the result has been custom made knifes with all the attention to detail you could possibly want. The knives themselves are simple in design, yet the quality is superb over that which you could find from a bigger manufacturer. Made with stainless steel, a knife from Atlas is utilitarian, simple, and beautiful at the same time.

A consumer can find Atlas blades in over 100 shops in the continental United States. The price is indicative of a custom, handmade knife. Some of the blades have etched designs on them, the handles mostly made with hard woods, polished to a brilliant shine. You can use these blades every day, never chipping the edge nor marring the surface. As with any stainless steel blade, some care is needed to keep them in a new condition but it is minimal, and although some of the blades are exquisite to look at, they are all made to be used. They are made to cut and chop and should definitely be put to work with some regularity.

Atlas Company does not only sell knives. They also have forges, burners, and etchers for those who are starting to become artisan knife makers themselves. Their forges include adjustable sliding tool rests, regulator hoses, and steel burners. All important accessories when starting the business. To make beautiful, eye catching etches on the surface of your newly minted blades, their etchers are all you need. They are push button activated for rapid pulse etching. You can also use them with 3rd party stamp pads if you so desire. These etchers and forges may be purchased from a variety of on line sources.

Comments on the Econo Steel Grip Tomahawk - Atlas Chipping Hammers Come and Cross Chisel

Have you or someone you know purchased or used the Econo Steel Grip Tomahawk - Atlas Chipping Hammers Come and Cross Chisel? How did it work? Share with the community!

Your Name:
Type (case sensitive) here:
No comments have been entered!