M48 Apocalypse Tactical Tomahawk Toxic Green & Sheath

 

M48 Apocalypse Tactical Tomahawk Toxic Green & Sheath Video


Availability & Pricing


No Ebay search results found for M48 Apocalypse Tactical Tomahawk Toxic Green & Sheath, sorry!

Member Rating: M48 Apocalypse Tactical Tomahawk Toxic Green & Sheath

Do you own or have you used the M48 Apocalypse Tactical Tomahawk Toxic Green & Sheath? If so, rate it!

You must be registered and logged in to rate!

TomahawkDB Member Rating
Not yet rated!

Blade Type Information: 2Cr13 Stainless Steel

Steel has made yet another advance with the advent of 2Cr13. The ground-breaking properties of 2Cr13 stainless steel allows for a variety of applications ranging from the production of domestic knives to heavy-duty metals used in military manufacturing. One advantage offered by 2Cr13 stainless steel in addition to its inherent strength is its ability to use Black-Oxide coating which makes it extremely resistant to corrosion.

This advance reduces the onset of corrosion by essentially working to reduce how porous the steel is. 2Cr13 stainless steel is particle-reinforced for added strength and resilience. Immersion tests have revealed that this steel has a finer matrix structure resulting in an increased tinsel strength, and the electrostag remelting process used in manufacturing it makes it highly versatile. In addition to the pure molecular strength of the steel, the added Black-Oxide coating further increases the resistance to a variety of corrosive materials.

Black-Oxide coating is a process in which a conversion coat is added to minimize the amount of light a surface reflects in addition to increasing its overall strength. The mixture is further enhanced with the inclusion of oil or wax for industrial purposes.

In order to achieve these results, the metal is placed in a bath of nitrates, nitrides, and sodium hydroxide. The chemical reaction that takes place converts the surface of the metal to magnetite. This hot-bath procedure for applying Black-Oxide coating offers many advantages towards increasing the efficiency of the manufacturing process. It allows for the production of large quantities of metals, makes no significant impact on the metal's surface dimensions, and is a cheaper alternative to processes involving electroplating.

Handle Material Information: Fiberglass Reinforced Nylon

Nylon is a generic name for a family of synthetic polymers known as polyamides, Nylon is one of the most commonly used polymers.

Nylon can be used as the matrix material in composite materials, with reinforcing fibers like glass or carbon fiber. A composite like this has a higher density than pure nylon. The good heat resistance of such materials makes them feasible competitors to metals.

Nylon has the ability to be very lustrous, semilustrous or dull. It has high durability, excellent abrasion resistance, is resistant to insects, fungi, and animals, as well as molds, mildew, rot and many chemicals, will melt instead of burning and has good strength.

Rockwell Hardness: n/a

The M48 Apocalypse Tactical Tomahawk Toxic Green & Sheath has a Rockwell Hardness of n/a

Stanley P. Rockwell inevnted the Rockwell Hardness Test in 1919 while working as a metallurgist in ball bearing plant. Rockwell wanted to measure the uniformity and hardness of inner and outer rings on which the ball bearings rolled. He designed a device that could measure hardness accurately and quickly.

The American Society for Testing and Materials (ASTM) standardized a set of scales for testing Rockwell hardness values. Each scale has been designated a letter and corresponds to a different group of materials. Scale C is used for steel, titanium, deep case hardened steel, hard cast irons and other materials harder than scale B 100.

Knife blades and other steel hardened tools are made from metals that match to the Rockwell C scale. Most blade makers display the hardness number as "HRC xx" or "HRC xx - xx" providing a range, where "xx" indicates a Rockwell hardness number. Not many blades measure over HRC 70. Most functional blades rate somewhere between HRC 56 and HRC 63.

Generally, blades with a lower HRC number don't hold and edge for long under demanding use, but they are easier to sharpen. Blades with a higher HRC value stay sharp for longer, but are more difficult to sharpen. As an example, stainless steel has a HRC higher than carbon steel, but it is also more difficult to sharpen than carbon steel.

Company Information: BudK

Founded in 1988, the BudK Worldwide Company is a corporation located on ten acres of land in the neighborhood of Moultrie, Georgia, that specializes in bladed and tactical and collectible tools: knives, axes, swords, and tomahawks and more, both for display, recreations, and real-word use.

The original founder and current Chief Executive Officer is Clint H. Kadel. Kadel was nineteen years old when he sold his first knife out of a relative's garage in Georgia. The continued growth of BudK comes from a direct result of his constant expansion of the tactical products available from the company.

BudK presents a wide variety of knives, swords, martial arts, hunting and shooting, stun guns, b;low guns, and survival gear, including tactical tomahawks. Compared to a camp or hand axe, a tactical tomahawk provides more versatility as a tool and weapon, being lighter and more aggressively designed, as well as often being used for throwing.

Every BudK product is backed by a 100% satisfaction guarantee. Any item ordered from BudK can be returned within 60 days of purchase for a refund or exchange.

Comments on the M48 Apocalypse Tactical Tomahawk Toxic Green & Sheath

Have you or someone you know purchased or used the M48 Apocalypse Tactical Tomahawk Toxic Green & Sheath? How did it work? Share with the community!

Your Name:
Comment:
Type (case sensitive) here:
No comments have been entered!